| T O P I C R E V I E W |
| ScalySituation |
Posted - 20/11/2012 : 18:05:14
Hi there, me and Nan putting Medusas new viv together we're not doing too bad but confused as to where parts g and h go, it looks like they screw into the wood but there's no holes.
Help...!
Scaly xx |
| 9 L A T E S T R E P L I E S (Newest First) |
| ScalySituation |
Posted - 21/11/2012 : 14:30:43
just couldnt get it in, but all sealed (with glue gun glue) and the front is holding nicely |
| Mort13 |
Posted - 21/11/2012 : 12:01:40
The plastic part of the widget pushes into a hole but you have to screw the screw part into the wooden plinth. Theres no pre-drilled hole for that,least there wasn't on mine any how. |
| a33272 |
Posted - 20/11/2012 : 23:24:32
As thorne says the widget pushes in a hole in the top there may not be a pre drilled hole in the front rail though. So it might just be a case of just screw it in. |
| Thorne Walker |
Posted - 20/11/2012 : 23:06:58
http://www.vivexotic.co.uk/PDF/VX%20VIVARIUMS/VX48%20Instructions%20HAGEN.pdf
The widget in question goes inside at the front to brace the lower panel that holds the glass...
The other option is that the top and bottom front pieces have been swapped... |
| Donnie |
Posted - 20/11/2012 : 20:50:18
What parts are g and h and an you put a pic up? |
| ScalySituation |
Posted - 20/11/2012 : 19:43:28
It's all up, that part is still bothering me though |
| Katie.Dublin |
Posted - 20/11/2012 : 19:38:29
Well, good luck with that one!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I just RE-assembled mine after it almost completely fell apart after a few months of use..! So ill not be giving any advice |
| a33272 |
Posted - 20/11/2012 : 18:57:02
Ohhhhhh no........... |
| Nasicus |
Posted - 20/11/2012 : 18:41:44
Try pressing on where they should be with your nail, sometimes I find the holes are in the wood, but not in the woodprint cover the put on xD |
