| Author |
 Topic  |
|
|
mashb2
Snake Mite
United Kingdom
2 Posts |
 Posted - 13/10/2012 : 21:43:40
|
| Hi all can some body help me please i live very close to swallow aquatics and will be off there to buy a heat mat for a 3ft viv i think i should get the 17" x 11" 20 watt, What is the best way to control and monitor the temp thanks |
|
|
coxymk2
Sub Adult
United Kingdom
1245 Posts |
Posted - 13/10/2012 : 22:07:25
|
| You will need a digital thermometer and a thermostat |
0.0.1 ANERY (Liquorice)
0.0.1 CAROLINA (Bangle)
0.0.1 AMEL (Boozer)
|
 |
|
|
scottishbluebird
it is all my fault
United Kingdom
8403 Posts |
Posted - 13/10/2012 : 22:17:18
|
| As above |
     
0.1.0 Corn - Kellogs
1.0.0 Hognose - Storm
0.1.0 Staffy - Lyla
1.0.0 Spaffy(staffy x springer)-Spyro
1.0.0 Ferret - Peanut R.I.P
0.1.0 Crestie - Fudge. Wish List - Pygmy hedgehog. Tropiocolotes |
|
|
|
Moppet
Fully Grown Corn
United Kingdom
3315 Posts |
Posted - 13/10/2012 : 22:44:40
|
The heat mat should cover approximately 1/3 to 1/2 of the floor space of the viv. So for your vx36, the 20watt heat mat should do nicely.
A thermostat will control the temperature for you, I would suggest the habistat thermostat. Like this one:
http://www.swallowaquatics.co.uk/1180/products/habistat_mat_stat_thermostat_100w.aspx
You plug the heatmat into the stat and the stat into the mains. The stat has a probe which you put on the heatmat. You can set the temperature on the stat and it will keep the heatmat as close to that temperature as possible. However the heat setting on thermostats is often a little incorrect (pretty stable, but not quite right) so a digital thermometer is a must to monitor the heat of your heatmat. Just put the probe from the thermometer on the mat with the probe from the thermostat 
Hope that helped |
2.4.0 Corn snakes
1.0.0 horse
0.1.0 Golden retriever
1.4.0 Guinea pigs |
|
|
| |
Topic |
|
Heat mat question
